PlashLights® waterproof Bluetooth® controller is operated via a mobile phone app to turn on/off, adjust the brightness or color, choose a specific color, and change preset color patterns. There are a variety of pre-programmed lighting patterns to choose from. The operation is very simple with your devices control (IOS or Android). Your device (ie. phone) is not needed when a switch is installed as the lights will defer to the last setting when powered on. Example: If you have them on a blue strobe pattern and turn the power of at a switch or the Perko, when power is applied at a later date the lights will be on blue strobe. Basically, your device/phone is only required to change the color or patterns.
FEATURES
- Requires download of PlashLights® APP (FREE)
- Bluetooth ® 5.2 for better connectivity and longer usable BT distance
- Completely redesigned for minimal (if any) RF interference, upgraded to the highest quality components available for longevity and dependability
- Ability to "delete" previous connected devices
- Semi-transparent cover so you can see when it connects and the function that it is on.
- Easily control and synchronize up to 20A of RGB or RGBW lighting. (that's up to 60ft of our high output flexible strip lighting)
- Integrated Memory Function. This means the device (phone, etc) is only required to change the color/pattern. Example: if you leave it on blue then turn it off the next time you turn it on it will be on blue.
- Provides the ability to dim, change colors, choose pre-programmed patterns, create custom patterns, increase/decrease speed, and "go to the music."
- One controller equals one zone. With multiple controllers you can easily sync zones or control independently. You also have the ability to rename the zone.
- Simple to mount with a tab on each side
- IP67 Rated Enclosure = Waterproof
- Compatibility: BlueTooth 5.2® (BlueTooth® devices 4.0 or above)
- Supports mobile phone system: IOS 6.0 & Android 4.3 or above
- Operating Input Voltage: 12~24V DC
- Output: 18AWG / 5 Conductor (Black[V+], Red[-], Green[-], Blue[-], White[-] not used if using RGB, the white wire is only for RGBW lights)
- Software Language: English
- Control Distance: 900 feet max (100ft+ is realistic. Metal will weaken signal)
- Size: 3-13/16" long x 1-1/4" tall x 1-15/16" wide
- Working temperature: - 4°F to 145°F
- 100% MADE & ASSEMBLED IN USA
- Instructions included in package and on APP
MULTI-ZONE SYNC FEATURE
- Control multiple zones with multiple controllers as they will all sync together (each controller is sold separately).
NOTES
- Do not place RGBW controller inside a metal container as it will block the signal.
- Double check your incoming voltage as this controller CANNOT accept reverse polarity, AC voltage, or DC voltage over 24V. Reverse Polarity Protection and Over-Temperature Protection was removed in part to eliminate the noise interference. Do not short circuit the wiring or overload the controller as it will cause irreversible damage to the controller.
- This controller will operate both normal RGB (Red, Green, & Blue) and RGBW (RGB + White). If using RGB then the white output wire will not be used.
SPECIFICATIONS DOWNLOAD